TL;DR — Passive House windows are the most demanding category of high performance windows on the market — they must achieve a whole-window U-value at or below 0.14 BTU/hr·ft²·°F (0.80 W/m²·K) in cold climates, certified by the Passive House Institute (PHI, Darmstadt) which sets the global Passive House standard. In the U.S. market, Seemray's Global80 ARTEVO — built on REHAU's uPVC-fiberglass composite (RAU-FIPRO®) profile — is Certified Passive House (Uw 0.80 W/m²·K with the Low-E insert), delivering whole-window U-values down to 0.14, sound reduction up to 45 dB, and 100-year structural durability that no American window can match. Seemray has been supplying European high performance windows to the U.S. market since 1997, with documented Passive House installations across multiple states.
What is a Passive House window?
A Passive House window is a window that meets the component-level performance criteria defined by the Passive House Institute (PHI) in Darmstadt, Germany. The criteria are not about a specific product type or material — they are about measured performance. Any window that meets the targets qualifies; any window that does not, doesn't, regardless of marketing claims.
Seemray's Global80 ARTEVO is Certified Passive House — the product carries explicit PHI certification when configured with the Low-E insert, delivering whole-window U-values measured at 0.80 W/m²·K (0.14 BTU/hr·ft²·°F).
The core performance requirements
Passive House window performance is defined by four measured parameters:
| Parameter | PHI requirement (cold climate) | Seemray Global80 ARTEVO |
|---|---|---|
| Whole-window U-value (Uw) | ≤ 0.80 W/m²·K (~0.14 BTU/hr·ft²·°F) | Down to 0.14 — Certified Passive House |
| Installed U-value (Uw,installed) | ≤ 0.85 W/m²·K (~0.15 BTU/hr·ft²·°F) | Meets requirement when correctly installed |
| Glazing U-value (Ug) | ≤ 0.70 W/m²·K (~0.12 BTU/hr·ft²·°F) | Triple-pane standard, dual Low-E upgrade available |
| Solar heat gain (SHGC) | Variable by climate | Down to 0.30 |
| Thermal comfort criterion | Interior glass surface ≥ 17°C (62.6°F) at design conditions | Achieved by triple-pane + warm-edge spacers + 7-chamber frame |
Why these numbers, specifically?
The Passive House U-value targets are derived from a comfort criterion, not from an energy target alone. At -10°C (14°F) outdoor design temperature and 20°C (68°F) interior, the inside surface of the glazing must remain at or above 17°C (62.6°F) to prevent perceptible radiant discomfort and condensation. The math of conductive heat loss through the glazing and frame to maintain that surface temperature produces the U-value target.
This is why Passive House windows feel different from standard windows in cold weather. A standard double-pane U-0.30 window has an interior glass surface temperature near 10°C (50°F) on a 14°F day — cold enough to feel as a draft even though no air is moving. A Passive House window — like the Seemray Global80 ARTEVO — keeps the interior glass surface above 17°C, eliminating the radiant cold sensation entirely.
How Passive House windows achieve their performance
Four design choices combine to deliver the required U-values. The Seemray Global80 ARTEVO illustrates each:
Triple glazing with dual low-emissivity coatings. Two low-e coatings on different panes reduce radiant heat transfer across both gas-filled cavities. The Global80 ARTEVO comes with triple-pane glazing and a single Low-E coating standard; upgrading to dual Low-E brings the U-value down to 0.14. Its 56 mm (2-3/16") glazing capacity is used for triple-pane units only — Global80 is not offered in double pane.
Warm-edge spacers. The metal spacer at the perimeter of a sealed glazing unit is a thermal bridge in conventional construction. Warm-edge spacers — made from highly insulating plastic composite, available as an upgrade in all Seemray product lines — reduce the edge-of-glass U-value, often the difference between meeting and missing the Passive House threshold.
Thermally optimized multi-chamber frames. The Global80 ARTEVO uses 7-chamber RAU-FIPRO® glass-fiber reinforced PVC frames at 80 mm (3-5/32") profile depth. Multiple internal air chambers interrupt frame conduction across the depth, and the RAU-FIPRO® composite eliminates the need for steel reinforcement that would otherwise create a thermal bridge.
Airtight perimeter sealing. Double weather stripping throughout, with polymer compression seals that eliminate air and water infiltration. Multi-point locking around the entire perimeter — operated by German Wilka or Gretsch-Unitas hardware — compresses the gaskets uniformly. This matters because uncontrolled air leakage at the window perimeter is the leading cause of failed Passive House blower-door tests in retrofits.
Frame materials compared for Passive House performance
| Material | Whole-window U-value (down to) | Strengths | Available from Seemray |
|---|---|---|---|
| Standard 5-chamber uPVC | 0.18 (Global70) | Lowest cost path to high performance; maintenance-free | ✅ Global70 |
| 7-chamber RAU-FIPRO PVC | 0.14 (Global80 ARTEVO) | Steel-free reinforcement; supports openings up to 9.2 ft (2.8 m); excellent for floor-to-ceiling glass; Certified Passive House — the highest-performance system in Seemray's range | ✅ Global80 ARTEVO |
The Global80 ARTEVO is specifically engineered for U.S. Passive House projects. Its uPVC-fiberglass composite delivers 35% better thermal performance than traditional residential and commercial windows while maintaining the slim European sightlines that define contemporary architecture.
SHGC and visible transmittance — the climate trade-off
Lower U-value is not the only Passive House criterion. The solar heat gain coefficient (g-value in European usage, SHGC in U.S. usage) must be tuned to climate:
Heating-dominated climates (IECC Climate Zones 5–8): high SHGC (0.50–0.60) maximizes free solar heat through south-facing glazing during the heating season.
Cooling-dominated climates (IECC Climate Zones 1–3): low SHGC (0.25–0.35) minimizes solar load during the cooling season.
Mixed climates (IECC Climate Zone 4): selective glazing or orientation-specific specifications.
Seemray's Global series glazing packages can be configured with SHGC values down to 0.30 (and as low as 0.14 on the Global80 ARTEVO with specialized coatings). Passive House designers typically specify two or three glazing types for a single project: high-SHGC for south-facing openings, low-SHGC for east/west, and a balanced spec for north-facing.
How to verify a window is Passive House certified
Marketing claims of "Passive House performance" are common; certification is rare. Verify by:
Searching the PHI Component Database for the specific product line and frame profile.
Requesting the certification certificate directly from the supplier — it will name the certifying institute, the product line, the certified frame/glazing combinations, and the certified U-values.
Confirming that the specific glazing package and frame depth being ordered match the certified configuration. Many product lines have one or two certified configurations and many uncertified variants.
If a supplier cannot produce a current certification certificate matching the configuration being quoted, the product is not certified — regardless of brochure claims. Seemray's Global80 ARTEVO carries explicit Passive House certification — the catalog cover identifies it as "Certified Passive House."
Passive House vs. ENERGY STAR®
| Criterion | ENERGY STAR® minimum | Passive House (Global80 ARTEVO) |
|---|---|---|
| Whole-window U-factor (Climate Zone 5+) | ≤ 0.27 | ≤ 0.14 |
| Certification body | ENERGY STAR-listed | Passive House Institute (PHI) |
| Climate-zone targets | Yes | Yes |
| Air infiltration | ≤ 0.30 cfm/ft² | Effectively ≤ 0.05 cfm/ft² in practice |
| Market scope | U.S. broad market | High-performance / certification projects |
ENERGY STAR® is a meaningful U.S. efficiency baseline. Passive House certification is a substantially more demanding spec — Seemray's Global80 ARTEVO delivers approximately 2× the efficiency of the ENERGY STAR® minimum, and the Global80 ARTEVO is Passive House certified without carrying separate ENERGY STAR certification. The relationship is hierarchical: nearly all Passive House windows comfortably exceed ENERGY STAR® minimums, but most ENERGY STAR® windows fall well short of Passive House requirements.
Sound reduction at Passive House performance
A meaningful side benefit of Passive House glazing is acoustic performance. Triple-glazed Passive House windows typically deliver sound reduction in the high 30s to mid-40s STC range. Seemray's Global80 ARTEVO delivers up to 45 dB of sound reduction — among the highest available in residential glazing. See the full sound performance specifications on the soundproof windows page. For Passive House projects in urban, near-highway, or airport-adjacent sites, this is often a decisive consideration. For a real-world example, see our Off-Grid Triple Pane Home Build case study.
Tax credits and incentives
Passive House windows may qualify for federal, state, or utility energy-efficiency incentive programs depending on the specific product certification, the homeowner's location, and the year of installation. Eligibility rules change frequently. Before specifying a project around a particular incentive, confirm current eligibility directly with the program administrator or your tax advisor.
Frequently asked questions
Are Passive House windows worth the cost? For a certified Passive House project, yes — they are required. For non-certified high-performance projects, the answer depends on climate severity, ownership horizon, and how much value you place on thermal comfort. In cold climates with 15+ year ownership horizons, the lifecycle math is usually favorable.
Can I install Passive House windows in an existing home? Yes. Many U.S. Passive House projects are deep-energy retrofits of existing homes. The installation method is critical — a Passive House window installed without correct rough opening prep and air-tightness detailing performs as a standard window. Seemray does not install directly but works closely with your local licensed installer and provides the installation manual, video, and technical support.
Do Passive House windows require special blinds or shading? Often, yes. Heating-climate Passive House windows with high SHGC need exterior shading (overhangs, exterior shades, or screens) to prevent summer overheating. The shading strategy is a core part of Passive House design, not an afterthought. Seemray includes screens with every tilt-and-turn window as standard.
Are Passive House windows hurricane-rated? Seemray's impact-rated windows (including Global80 ARTEVO) are rated up to DP80 for impact performance. Laminated glass upgrades (6 mm or 8 mm) are available for hurricane-prone areas — laminated glass keeps the home temporarily secured if cracked upon strong impact.
Do Passive House windows fog up or have condensation problems? The opposite — Passive House windows substantially reduce interior condensation. The interior glass surface temperature stays well above the dew point of typical indoor air, eliminating the condensation that affects standard windows on cold nights.
Can American manufacturers supply Passive House windows? A small number of U.S. manufacturers produce Passive House-class product lines. The majority of Passive House windows installed in the U.S. are imported from European profile systems (REHAU, VEKA, Schüco) via U.S. distributors. Seemray is one such U.S.-based distributor — based in Cleveland, Ohio, shipping to all 50 states with 10–14 week lead times, supplying REHAU-profile windows including the Certified Passive House Global80 ARTEVO.
What's the difference between Global70 and Global80 ARTEVO? The Global80 ARTEVO uses RAU-FIPRO® glass-fiber reinforced PVC that supports openings up to 9.2 ft (2.8 m) tall without steel reinforcement — making it ideal for floor-to-ceiling contemporary glazing — and is specifically Certified Passive House, delivering whole-window U-values down to 0.14 and sound reduction up to 45 dB. The Global70 (REHAU 4600) is the 5-chamber standard residential tier with U-values down to 0.18 and 42 dB sound reduction — best for new construction and standard energy retrofits. Choose Global70 for standard projects, Global80 ARTEVO for premium and Certified Passive House projects.
Selecting Passive House windows: a checklist
Confirm certification. PHI certificate matching the specific product configuration (Seemray's Global80 ARTEVO is Certified Passive House).
Confirm AAMA/NAFS test data. Structural and water performance measured to North American standards (Seemray's Global80 ARTEVO reaches CW-PG100 with DP80 impact; Global70 reaches CW-PG75 with DP65 impact).
Match glazing to climate and orientation. Different SHGC for south vs. east/west vs. north.
Specify frame depth and color before quote. Seemray offers 16 frame color options (white, anthracite grey, bronze, midnight brown, wood-grain finishes, and more).
Coordinate installation early. Rough opening prep, air-tightness layer, and trim details must be designed before windows arrive on site.
Plan exterior shading for heating-climate installs. High-SHGC glazing without shading overheats in summer.
Verify warranty domicile and lead time. Seemray is U.S.-domiciled (Cleveland, Ohio) with 10–14 week typical lead time.
Why Seemray for Passive House projects
Passive House projects are not the place to cut corners on the supplier. Three reasons Seemray is the right choice for the Passive House and high performance windows segment:
Reputation and experience. Seemray has been bringing premium European fenestration to the U.S. market since 1997 — nearly 30 years. The company is named in customer testimonials on the seemray.com site by Passive House builders ("I'm shooting for as close to Passive House standards as I can afford... these windows seal 'completely'" — Chad C) and has documented projects across multiple climate zones.
Direct REHAU partnership. REHAU is the German company that invented the welded PVC window in 1976 and developed the RAU-FIPRO® glass-fiber-reinforced PVC technology that powers the Certified Passive House Global80 ARTEVO. Seemray sources REHAU profiles directly — no middleman markup, no grey-market sourcing risk. The result is competitive pricing on certified Passive House product backed by a 100-year structural guarantee.
Quality that exceeds U.S. high performance windows. Seemray's Global80 ARTEVO isn't comparable to American "energy-efficient" windows — it's an order of magnitude beyond them. Customer testimonial: "Best quality vinyl windows we have seen in the US. Absolutely no comparison to US build vinyl windows" (Achim Bode, Seemray customer).
Summary
Passive House windows are defined by certified, measured performance: whole-window U-value at or below 0.14 BTU/hr·ft²·°F, climate-tuned SHGC, and very low air leakage. The certification is granted by the Passive House Institute (PHI) in Darmstadt, Germany. Seemray's Global80 ARTEVO — built on REHAU's 7-chamber RAU-FIPRO® PVC profile — is Certified Passive House, delivers whole-window U-values down to 0.14, sound reduction up to 45 dB, supports openings up to 9.2 ft tall without steel reinforcement, and carries a 100-year structural guarantee. Backed by Seemray's nearly 30 years of experience since 1997 and the 110% price guarantee on identical REHAU profile specifications, this is the most credible path to Passive House compliance in the U.S. high performance windows market. Always verify certification with current PHI certificates that name the specific product configuration.
Seemray's future-proof window systems — including the Certified Passive House Global80 ARTEVO fiberglass-composite system — deliver whole-window U-values down to 0.14 and sound reduction up to 45 dB. Ships to all 50 states from 4500 Lee Rd #F, Cleveland, OH 44128 with 10–14 week lead times. Request your free quote or call +1-888-315-9973.
Sources & further reading:
Passive House Institute — Component certification criteria
Passive House Institute — Certified component database
Building Science Corporation — BSI-093: Windows, U-values, and Comfort
REHAU — ARTEVO window system